Durakolor Deck Sheet
Durakolor Deck Sheet is a trapezoidal profile deck steel sheet used for floor decking. It can made from Cold Rolled (CR) /, Galvanised Steel (GI), or Galvalume coil. It is made from high strength steel of upto 550 mpa. It has hot high spanning capacity. When it is used as a composite concrete deck panel, i.e. when concrete is poured over it, a strong bond is created between concrete and steel. The specially designed embossments on our profile further enhance this bond. This new concept brings about saving for its end users by reduced usage of concrete and steel. It also saves time and labour, thus recommended by most of the consultants of modern steel and RCC buildings used for both industrial and residential purposes.
Application Area
• Multiplexes
• Power Plants
• Mezzanine Floors in Industrial Buildings & Warehouses
Deck Sheet Dimensions
| Total Coated Thickness* – mm | 0.80 to 2.00 |
| Crest Height (mm)* – | 51 |
| Pitch Distance (mm)* – | 317 |
| Overall width* – mm | 975 |
| Effective Cover width* – mm | 962 |
| Standard Sheet length* – mm | 2440 (8ft), 3050 (10ft), 3660 (12ft), 4270 (14ft), 4880 (16ft) |
| *Customized thickness and lengths can be supplied based on specific requirements of customers | |
  | |
*Terms and conditions apply *Sheet length in feet is approximate value *Standard deviations apply | |
Benefits
2. Saves concrete usage
3. Saves Steel usage
4. No reinforcement rods TMT are required
5. No shuttering required
6. Reduced Slab Thickness
7. Reduced dead weight of the building
